Part7 another solut...
 
Notifications
Clear all

Part7 another solution

1 Posts
1 Users
0 Likes
17 Views
(@admin)
Member Admin
Joined: 3 years ago
Posts: 381
Topic starter  

The mission to create a canbus demonstration mock up continues. 

This time Its a 2-ch CAN HAT attached to a rasp pi4. 
Finally the Pi4 price has been reduced and a 8meg unit can be had for 130, coupled with a 10in display and the CAN HAT this comes in on the high price side but then again the Pi can be used for other projects

 

display
pi4
2chcan

 

 

https://www.waveshare.com/wiki/2-CH_CAN_HAT

 

SUCCESS:  This method to construct a working solution, following the provided instructions provided by the manufacture. Yes it got difficult but it was successful in the end and didn't take more than a couple hours

This success was partly because the PI4 is so much faster than the pi3 that having the internet connected and using the terminal together made this a cut and past routine. There were a couple errors but I just drove on past them and in the end the board was recognized and then transmitted from one bus to the other

IMG 0336[1]
IMG 0340[1]
IMG 0337[1]

   
Quote

©2023 LocalAd

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending
WordPress Ads

Log in with your credentials

or    

Forgot your details?

Create Account