https://www.fabbaloo.com/blog/2020/9/28/open-source-high-temperature-reprap-3d-printer-announced
Today I start identifying the parts and start looking for materials. No China Build is the stratgy
Parts ordering started
first part print. Still getting settings tuned, this part is usable. This is the part in the bridge the gap video. closed up pretty good
Metal purchase
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$34.38 qty 6
Length - 23.62 Inches (600 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$68.75 qty14
Length - 18.5 Inches (470 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$8.94 qty2
Length - 15.75 Inches (400 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$16.37 qty 4
Length - 13.39 Inches (340 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$8.31 qty 2
Length - 13.78 Inches (350 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$5.79 2
Length - 5.91 Inches (150 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$5.66 qty 2
Length - 5.51 Inches (140 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$10.32 qty 4
Length - 3.94 Inches (100 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$4.66 qty 2
Length - 2.36 Inches (60 Millimeters) x $0.16
Cut To Length - 1 x $1.95
Order Overview
Subtotal $163.17
Shipping & Handling $20.77
Tax $12.02
Grand Total $195.96
Metal purchase
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$34.38 qty 6
Length - 23.62 Inches (600 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$68.75 qty14
Length - 18.5 Inches (470 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$8.94 qty2
Length - 15.75 Inches (400 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$16.37 qty 4
Length - 13.39 Inches (340 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$8.31 qty 2
Length - 13.78 Inches (350 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$5.79 2
Length - 5.91 Inches (150 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$5.66 qty 2
Length - 5.51 Inches (140 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$10.32 qty 4
Length - 3.94 Inches (100 Millimeters) x $0.16
Cut To Length - 1 x $1.95
20-2020
SKU: 20-2020
20mm X 20mm T-Slotted Profile - Four Open T-Slots
$4.66 qty 2
Length - 2.36 Inches (60 Millimeters) x $0.16
Cut To Length - 1 x $1.95
Order Overview
Subtotal $163.17
Shipping & Handling $20.77
Tax $12.02
Grand Total $195.96
hardware $222.73 USD
| Cart Items | SKU | Qty |
| ZYLtech SBR16 Linear Rail Set + Bearing Blocks - Pre-cut lengths 300mm-2000mm | KT-RR-LIN-300 | 1 |
| 12x 90° 20mm Aluminum Brace/Angle Bracket for 2020 Extrusion | HW-2020ANGBR-ALU-90DEG-SM-12x | 7 |
| 100x ZYLtech Hammer Nuts (T-Slot) for 2020 Aluminum Extrusion - M4 or M5 | HW-M4-HAMMER-100PK | 3 |
| Zyltech MGN12 H-TYPE - Linear Rail with Single or Double Carriage Block | HW-MGN12-300-oneblock | 2 |
| Zyltech MGN12 H-TYPE - Linear Rail with Single or Double Carriage Block | HW-MGN12-300-twoblock | 2 |
| T-slot L type 90 degree 2020 Inside bracket 12 Pack | HW-INBRKT90-2020-12x | 1 |
| 100x M4x8 Button Hex Screws High Strength Class 10.9 BLACK | HW-M4X8-BLK-100PK | 3 |
Printing problems today
The printer head clogged. the machine ran for a few minutes , I heard the feeder popping, when the filiment stops moving it makes a noise, if the print head is to close to the base plate it does it also.
I removed the head but plastic had melted and backed up inside the head, needed to use a drill bit to clean it out.
testing now, replaced the head , leveled the bed, hope for the best
This is the first print. Pretty sharp .
#Tip. I am using cura and there is a cura plug-in for adjusting the z height, you can do this when you slice the item
Recent Comments