how-to-prolong-your-lithium-polymer-batteries-|-battery-monday

In this issue, we are going to discuss the challenges of Lithium Polymer batteries especially since they suffer from a shorter life if not cared for properly.

Luckily, it’s easy to make sure your Lithium Polymers last as long as they should, allowing you to save on money and the hassle.

When should you charge?

The first challenge in taking care of Lithium Polymers is knowing when to charge them.

In general, Lithium Polymers have a lifespan of somewhere between 300 and 500 charge cycles, from full to empty and back to full again.

battery cycle-full charge to empty then full charge-battery monday-grepow

But you can help maximize that life by charging before the battery is empty.

Unlike other rechargeable batteries like Ni-cads, Lithium Polymers do not have a memory. So, there is no need to wait until the battery is empty before charging.

In fact, with Lithium Polymer batteries, recharging before the battery is 80% depleted can help prolong the battery life, and is a more efficient way to charge too.

Such as cell phones and laptops, don’t wait until the screen dies before you charge. Charge whenever you get an opportunity.

LiPos are temperature sensitive

You should avoid charging when the battery is below 10ºC/50ºF as the chemical makeup of the battery means it is much less efficient when below that level.

Heat is just as important, hot Lithium Polymer batteries don’t take charge well either, so always ensure they have cooled down after use before charging.

In order to prolong the life of your battery, it is just as important to store them when they’re not being used.

In fact, for Lithium Polymers, this may be the area where most problems occur.

The temptation with batteries is to charge them up before putting them away, so they are ready to go the next time you need them, but for Lithium Polymer batteries without a BMS, this is a disaster.

Storage

Thankfully, Lithium Polymer chargers often have a ‘storage’ option for charging, which gives the battery a suitable charge for storage.

gensace imar three-lipo battery charger- storage function-protect lipo rc battery

Fully charged batteries can expand when stored for an extended period, rendering them unusable, so if you have a storage option, make sure you use it.

Because Lithium Polymer batteries lose less than 1% of charge per month when stored, you will not be in danger of allowing them to discharge too far unless stored for a very long time.

However, it is important to remember that Lithium Polymers do not like being at extremely low voltages from a complete discharge, it can not only shorten life but also damage the battery in some circumstances, so keep an eye on those in storage. 

For more information on Lithium Polymer battery storage, please view our previous video titled, Storing Your Lithium Polymer Batteries.”.

Video

Battery Monday Channel

Grepow‘s Battery Monday Channel is about battery knowledge and battery tip. If you have any questions about this topic ( How to Prolong Your Lithium Polymer Batteries ) or have any battery-related things you want to know, please feel free to contact us by email at info@grepow.com.

We specialize in drone smart batteriesindustrial batteriesshaped batterieshigh discharge rate batterieshigh voltage batteriessemi solid batteries, etc. Our sub-brands Tattu and Gens ace focu on UAV batteries and RC batteries, respectively. Or if anything we could improve, email us, we will read the comment and provide a high-quality battery knowledge tutorial.

Grepow official website: https://www.grepow.com/

Grepow Facebook: https://www.facebook.com/grepowbattery

Grepow Linkedin: Grepow Battery

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments

©2021 LocalAd

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

0
Would love your thoughts, please comment.x
()
x

Log in with your credentials

or    

Forgot your details?

Create Account